[Next]
[Previous] [Up] [Top] [Contents] [Back]5.3 CC121 Memory Map
An on-board DIP switch has been implemented, which setting can be read by the MPU at address $xxxE01. The register at $xxxE01 is read-only. The following figure shows the bit assignments of the register.
Figure 5-4 Node ID Register
A switch that is in the 'on' position will read as '0', and the 'off' position will read as '1'.
CC121 - ARCNET Interface for VMEbus - 30 SEP 1996 Copyright © 1996 Compcontrol, Inc.
[Next]
[Previous] [Up] [Top] [Contents] [Back]