[Next]
[Previous] [Up] [Top] [Contents] [Back]Chapter 2 Specifications
The CC121 is a network interface module for ARCNET. The module uses a 20-MHz COM9026 protocol controller, and the COM9032 network transceiver. The on-board medium interface is a high-, or low-impedance coax interface or a twisted-pair interface. The coax interface uses a BNC connector at the front panel. The transceiver signals for a twisted-pair interface are available at the VMEbus P2 connector. A twisted-pair interface typically uses an RJ11 connector.
The following section gives an overview of the main parts that are used on the CC121 module.
[Next]
[Previous] [Up] [Top] [Contents] [Back]