[Next] [Previous] [Up] [Top] [Contents] [Back]

Chapter 4 Installation Procedures

4.7 Single Ended Inputs

Two resistor network sockets are positioned parallel to the group's input connector. When single ended TTL input signals are required for a group, the input resistor networks (4608X-104-302/622) have to be inserted in the sockets.

Note: Connect the TTL input signal to the 'plus' input and leave the 'minus' input open.

Single Ended Mode Resistors
Channel Resistor Networks
Group Numbers
A 1-3 RN34 and RN35
B 4-6 RN36 and RN37
C 7-9 RN38 and RN39
D 10-12 RN40 and RN41

CC133 - 12 Channel Incremental Encoder Interface With Isolated Inputs - 30 SEP 1996
Copyright © 1996 Compcontrol, Inc.

[Next] [Previous] [Up] [Top] [Contents] [Back]