5.1 Introduction

This chapter provides operating instructions for the CC433 module and also all necessary information for system programmers to take full advantage of the features of the module. The descriptions will include implementation dependent programming information that can not be found in data sheets.

The memory map of the CC433 is divided into four identical sections. Each part, or group, contains the registers of three channels.

Global Memory Map
Group Offset	Description
$00	Group A Registers - Channels 1, 2 and 3
$40	Group B Registers - Channels 4, 5 and 6
$80	Group C Registers - Channels 7, 8 and 9
$C0	Group D Registers - Channels 10, 11 and 12

CC433 - 12 Channel Incremental Encoder Interface with Isolated Inputs and Cable Fault Detection - 22 MAY 1997

[Next] [Previous] [Up] [Top] [Contents] [Back]