[Next] [Previous] [Up] [Top] [Contents] [Back]

2.4 Jumper Settings

2.4.2 Address modifier

The module responds to 1 or 2 address modifier codes. JB1 selects whether the module can be accessed in supervisory mode only or in both supervisory and non-privileged mode.

Figure 2-1 Address Modifier Jumper

In supervisory mode the CC92 module only responds to AM code $2D while in supervisory and non-privileged mode it responds to AM codes $29 and $2D.

[Next] [Previous] [Up] [Top] [Contents] [Back]