[Next]
[Previous] [Up] [Top] [Contents] [Back]Chapter 2 Installation Instructions
The 32 I/O lines are available through the two connectors P3 and P4 on the front panel. The following table shows the connector pin layout.
| (+) | (-) | P3 | P4 |
|---|---|---|---|
| 1 | 20 | output 0 | output 16 |
| 2 | 21 | output 1 | output 17 |
| 3 | 22 | output 2 | output 18 |
| 4 | 23 | output 3 | output 19 |
| 5 | 24 | output 4 | output 20 |
| 6 | 25 | output 5 | output 21 |
| 7 | 26 | output 6 | output 22 |
| 8 | 27 | output 7 | output 23 |
| 9 | 28 | output 8 | output 24 |
| 10 | 29 | output 9 | output 25 |
| 11 | 30 | output 10 | output 26 |
| 12 | 31 | output 11 | output 27 |
| 13 | 32 | output 12 | output 28 |
| 14 | 33 | output 13 | output 29 |
| 15 | 34 | output 14 | output 30 |
| 16 | 35 | output 15 | output 31 |
| 17 | 36 | +5V | +5V |
| 18 | NC | NC | |
| 19 | 37 | COMMON | COMMON |
[Next]
[Previous] [Up] [Top] [Contents] [Back]