[Next] [Previous] [Up] [Top] [Contents] [Back]

Chapter 5 Programming Considerations

5.12 Bus Time Out

The bus time-out circuit generates a local Bus Error when a device does not respond within 2.4 µs (16 MHz MPU clock).

The bus time-out function is controlled by jumper JB3. During normal operating conditions, no jumper is installed at JB3 and the bus time-out is enabled. A jumper placed at JB3 will disable the bus time-out function.

CC175 - Dual Channel Intelligent CAN Interface for VMEbus - 30 SEP 1996
Copyright © 1996 Compcontrol, Inc.

[Next] [Previous] [Up] [Top] [Contents] [Back]