[Next]
[Previous] [Up] [Top] [Contents] [Back]Chapter 4 Installation Procedures
The module is shipped in an antistatic container to protect the module against static electricity. When the module is unpacked, avoid touching areas of integrated circuitry to prevent static discharge from damaging the circuits.
The module is used in VMEbus compatible systems and allows for configuration to suit many applications. Jumpers are used to select hardware specific options. The jumper block positioning and default jumper settings are illustrated in Appendix C. The pin definitions of the VMEbus P1, P2 connectors and Front Panel connectors P3, P4, P5, J1, and J2 are found in Appendix B.
[Next]
[Previous] [Up] [Top] [Contents] [Back]