[Next] [Previous] [Up] [Top] [Contents] [Back]

4.3 Jumper Settings

4.3.6 System Clock

Jumper JB6 is used to select the source of the local system clock. The source can be the output of a local X-tal controlled oscillator or the VMEbus system clock. The local oscillator has a frequency of 16 MHz.

Figure 4-6 System Clock Select

CC175 - Dual Channel Intelligent CAN Interface for VMEbus - 30 SEP 1996
Copyright © 1996 Compcontrol, Inc.

[Next] [Previous] [Up] [Top] [Contents] [Back]