[Next] [Previous] [Up] [Top] [Contents] [Back]

4.5 User Defined Physical Interfaces

4.5.1 VMEbus P2 Transition Modules

The following signals from the controllers are available.

Signal Descriptions VMEbus P2 Transition Modules
Signal Name
Channel[0/1]		 Description Direction
C[0/1]RX0 Input 0 to CAN Controller To CAN controller
C[0/1]RX1 Input 1 to CAN Controller To CAN controller
C[0/1]TX0 Output 0 from CAN Controller To transition
C[0/1]TX1 Output 1 from CAN Controller To transition
VCC +5V power supply To transition
GND Ground power supply To transition
VCC DC/DC Isolated +5V from DC/DC converter To transition
GND DC/DC Isolated Ground from DC/DC converter To transition

CC175 - Dual Channel Intelligent CAN Interface for VMEbus - 30 SEP 1996
Copyright © 1996 Compcontrol, Inc.

[Next] [Previous] [Up] [Top] [Contents] [Back]