[Next] [Previous] [Up] [Top] [Contents] [Back]

Chapter 4 Installation Procedures

4.5 User Defined Physical Interfaces

The CC175 has two options which allow for user defined physical interfaces.

A DC/DC converter is available on the CC175. The isolated VCC and GND signals can be used on the user defined modules for optical isolation. The DC/DC converter has the following characteristics:

Output Voltage +5V
Max. Output Current 360 mA
Isolation Voltage 500 VDC
4.5.1 - VMEbus P2 Transition Modules
4.5.2 - Mezzanine Modules

CC175 - Dual Channel Intelligent CAN Interface for VMEbus - 30 SEP 1996
Copyright © 1996 Compcontrol, Inc.

[Next] [Previous] [Up] [Top] [Contents] [Back]