[Next] [Previous] [Up] [Top] [Contents] [Back]

Chapter 5 Programming Considerations

5.8 CAN Controllers

The operation of the CAN Controllers is programmed by writing control words into the appropriate registers. Operational feedback is provided via status registers which can be read by the MPU. Appendix F shows detailed register map of the CAN Controller.

5.8.1 - RESET OUT Function

CC175 - Dual Channel Intelligent CAN Interface for VMEbus - 30 SEP 1996
Copyright © 1996 Compcontrol, Inc.

[Next] [Previous] [Up] [Top] [Contents] [Back]