[Next] [Previous] [Up] [Top] [Contents] [Back]

4.3 Jumper Settings

4.3.2 MPU Clock

Jumper JB2 is used to select the MPU clock rate.

Figure 4-2 MPU Clock Select

It may be useful to let the 16 MHz processor run at 8 MHz when using a standard (slow) logic analyser or emulator during the application debugging phase.

CC175 - Dual Channel Intelligent CAN Interface for VMEbus - 30 SEP 1996
Copyright © 1996 Compcontrol, Inc.

[Next] [Previous] [Up] [Top] [Contents] [Back]