[Next] [Previous] [Up] [Top] [Contents] [Back]

5.2 Device Group Registers

5.2.1 Channel Registers

A channel consists of a set of registers described in the following paragraphs. The actual VMEbus address of the registers can be calculated by adding the Group Offset and the Channel Offset to the board base address.

5.2.1.1 - Channel Counter Registers

5.2.1.2 - Enable Index Register

5.2.1.3 - Index Status Register

5.2.1.4 - Direct Input Register

5.2.1.5 - Compare State Register

5.2.1.6 - State On Interrupt Register

5.2.1.7 - Interrupt Mask Register

[Next] [Previous] [Up] [Top] [Contents] [Back]